Welcome to Hashimoto Precision Metal (Shenzhen) Ltd

Mailbox:

info@hskcoltd.com

Hashimoto Precision Metal (Shenzhen) Ltd

Specialize in precision metal stamping for 86 years
Technical
Your position: Home > Technical > Stamping processing

Contact us

Hashimoto Precision Metal (Shenzhen) Ltd

Address: No. 5, Zhuangcun Road, Xin Er Industrial Zone, Xinqiao street, Bao'an District, Shenzhen 518125, P.R.China

Tel: +86-755-27267875

Email: info@hskcoltd.com

Stamping processing


Stamping processing

Riveting

Riveting is the processing method of jointing two or more materials. That is to say, for materials that cannot be welded and bonded, riveting is used to connect them and to convert welding and bonding methods to improve production efficiency.
This technology has been used for years in the fields of household appliances and office automation equipment. In recent years, it has been widely used in automotive electronic components, micro-motors and more fields.

1.Riveting for special shape materials

Plate spring for
micro motors
Material C1720 T0.10 、C2680 T0.30
Processing mode Continuous die

2.Riveting for four materials

Safety valve for
filters
Material EGC T0.80/SGCC T0.30/
SPCC T0.40/SK5 T0.30
Processing mode Continuous die

3.Riveting for silver contacts

Contact for white goods Material C5210 T0.50
Processing mode Silver contacts-T type; continuous die

Bending process

Complex shape processing

We are good at processing complex shapes, such as multiple closed bends, slender bends, and riveted bends. Because Hashimoto group internally design, manufacture and maintain dies, the shape and material characteristics can be considered even in complex drawings, in order to find the best processing method for mass production.

複雑形状加工

Micro bend processing

Mass production has shown that minimum parts of automatic pencils with the minimal width of 0.5 mm can be processed.

Precision stamping, riveting and complex riveting processing can be achieved.

複雑形状加工

Research and develop micro-bend processing to achieve mass production

複雑形状加工

Sheet metal

Mass production:20μm(t0.02mm)~60μm(t0.06mm)
Trial production:2μm(t0.002mm)※titanium foil

Sheets can be die cut, bent and riveted.

薄板

Internalization of fixture, peripheral equipment, automation

In addition to die technology, Hashimoto group also internally makes fixtures, peripheral equipment and automata to improve productivity; we try to make products as fully automated as possible and reduce labor to ensure stable product supply and lower cost.

Production of various difficult-to-process materials

We are processing various difficult-to-process materials, such as phosphorus bronze, beryllium and stainless steel.

In addition to the electric furnace which can heat treat beryllium copper, based on application, stainless steel can also be heat treated within HSK group.


Hashimoto Precision Metal (Shenzhen) Ltd

Address: No. 5, Zhuangcun Road, Xin Er Industrial Zone, Xinqiao street, Bao'an District, Shenzhen 518125, P.R.China

Tel: +86-755-27267875

Email: info@hskcoltd.com

Follow us